PLEASE NOTE - THE LEAD TIME ON THIS KIT IS CURRENTLY 1 WEEK.

We've put this kit together so that you can get everything you need to wire up your camper at a genuinely low price, no crazy mark ups, no stupid gimmicks.

WHAT DOES THE KIT OFFER?

In simple terms, his kit will provide you with a 12V on/off grid system and a 240V mains hook up system.

You'll be able to keep your leisure battery topped up while on the move as it charges from your vehicle via the voltage sensitive relay. You can also wire up five 12V accessories (such as lights, water pump, fridge etc.) via the 5 gang main control panel which includes a built in voltmeter, dual USB ports, and a 12V socket.

Got some more tech you need charged? We'll also include a mini panel with yet another dual USB and 12V socket.

When you get to site, just simply plug into the 16A hook up to get 240V running through your van, powering a double socket, switch for your 2/3 way fridge (this can be changed to single socket if you don't have a fridge) and a single socket you use to plug in your on-board smart battery charger. This is fitted so that you can keep your 12V system powered up and leisure battery charged even when you aren't on the move.

SPLIT CHARGE VOLTAGE SENSITIVE RELAY (VSR) KIT

This comes with all parts required to enable you to charge up your camper vans leisure battery using the starter battery/alternator of your vehicle. Included in the kit is a voltage sensitive relay that only draws power and charges your leisure battery when your starter battery is at a certain voltage. This ensures that you never end up with a flat battery in your vehicle... which is always handy.

Please note, VSR’s are only compatible with vehicles without a smart alternator, regenerative braking, or stop/start technology. If you're unsure please just drop us a message.

TECHNICAL DETAILS

• 12V 140A Voltage Sensitive Relay
• 5M 16mm2 Red High Flex Battery Cable
• 1M 16mm2 Black High Flex Battery Cable
• 1 X Positive Leisure Battery Terminal
• 1 X Negative Leisure Battery Terminal
• 2 X Battery Terminal Cover
• 2 X Bolt Down Fuse Holders
• 2 X 100AMP Fuses
• 2 X 8mm Copper Crimp Terminals
• 8 X 6mm Cooper Crimp Terminals
• 2 X 70mm Black Heat Shrink
• 8 X 70mm Red Heat Shrink

MAIN 12V CAMPER VAN CONTROL PANEL

This is the main control panel for your camper van, from this, you can control up to five 12v accessories. The control panel is pre-wired for quick fitting, and the outlets are already complete with in-line fuse holders and fuses fitted.

As well as the switched outlets, the panel also comes with a voltmeter to show the current voltage of your leisure battery, a standard 12V port, and two USB A ports for charging phones etc.

MINI PANEL

To provide you with future outlets, we also include a further mini panel that provides another standard 12V port and a two USB A ports.

5M FUSED EASY LEAD

We've had this lead made to reduce the faff when installing the main control panel into your van.

This lead makes connections a breeze, simply install the ring terminals onto your leisure battery and connect the wires up to the panel

TECHNICAL DETAILS

• 5M lead length
• Moulded blade fuse holder
• Crimped and moulded 8MM ring terminals
• Comes with 2A / 3A / 5A / 7.5A / 10A blade fuses to closely match the connected load
• Max current - 10A

FIVE WAY NEGATIVE BUS BAR

This is included in the kit as a central location to terminate all your 12V accessory negatives from the control panel.

TECHNICAL DETAILS

• Max - 100A 48V
• Number of screw terminals - 5
• Number of studs - 2

SMART MAINS LEISURE BATTERY CHARGER

These chargers are designed to be permanently fitted in your camper van and provides a charge to your leisure battery, at a camping site, at home, or in fact anywhere you hook up.

12V 10A/9A 6 Stage (Lead Acid/AGM) / 4 Stage (Lithium) mains smart intelligent leisure battery charger & maintainer.

TECHNICAL DETAILS

• Short circuit, over charge and reverse polarity protection
• Leisure battery charger output - 10A (Lead Acid/AGM) / 9A (Lithium)
• Max Voltage - 14.5V Lead Acid / 14.9V AGM / 14.4V Lithium
• LCD Screen showing charging current, battery condition and voltage
• Please note the lithium setting on the charger as part of this kit is irrelevant as a Lithium battery cannot be used with a VSR.

240V MAINS HOOK UP KIT

This kit will be 90% pre-assembled with all the major wiring in the consumer unit completed. All you need to do is route the cable in your van and wire up the 16amp hook up point, the switch, and sockets.

When using your camper in the EU, they tend to use a system where the natural is not earthed, having double pole equipment ensures a higher level of safety. The outlets are also individually protected by their own MCBs as per regulations.

TECHNICAL DETAILS

• 1 X IP65 Rated 8 Way Enclosure with Earthing Bar
• 1 X 63A 30 mA Double Pole RCD
• 1 X 10A Double Pole MCB For Double Socket
• 2 X 6A Double Pole MCB For The Fridge Outlet & Single Socket
• 1 X 13A Metal Double Socket
• 1 X 13A Plastic Single Socket
• 1 X 20A Metal Double Pole Switch
• 1 X Double Socket Mounting Box
• 2 X Single Socket Mounting Boxes (One flush and one surface mounted)
• 1 X 240V IP44 Rated Hook Up Point
• 5M 2.5MM Flexi Mains Cable For Hook Up
• 3 X 3M 1.5MM Flexi Mains Cable For Sockets
• 2M Earth Cable
• 5 X 20MM Compression Glands

ADDITIONAL ITEMS

To help with the install, we also include 100 X Cable ties and 100 X Cable tie bases with the kit.

ADDITIONAL IMPORTANT INFORMATION

As with all the kits and layouts provided on our site, they serve as a guide only and we recommend all wiring and installation is carried out by a qualified professional. Disconnect all AC and DC power sources to prevent accidental shock. It is the installer’s responsibility to ensure compliance with all the applicable installation codes, regulations, and to ensure the equipment is fitted correctly.